- 15/5 NJW1616
- 600mA, 500kHz, Step-Down Switching Regulator in SOT-23
- 8/5 NJU7366
- Single-phase DC Brushless Motor Driver IC (Io=±250mA, A-PWM)
- 8/5 NJU7367
- Single-phase DC Brushless Motor Driver IC (Io=±350mA)
- 8/5 NJU7367A
- Single-phase DC Brushless Motor Driver IC (Io=±350mA, Start up Assist Function)
- 7/5 NJU7048
- High-Speed, Rail-to-Rail I/O, Quad CMOS Operational Amplifier
- 7/5 NJW4185
- High Voltage Io=500mA Low Dropout Regulator
- 7/5 NJG1683ME7
- High Isolation X-SP3T(DP6T) Switch
- 7/5 NJG1686MHH
- SP10T Antenna Switch GaAs MMIC
- 7/5 NJG1695ME7
- High Isolation X-SP4T(DP8T) Switch
| Products Information > Microprocessor Peripheral ICs > RS-232C > NJU6402B |
 |
Part Number NJU6402B
FUNCTION RS-232C LINE DRIVER/RECEIVER
GENERAL DESCRIPTION
The NJU6402B is a RS-232C line driver/receiver composed of 3 drivers and 3 receivers. The drivers convert the input of TTL level signals into RS232C level signals and limit the slew rate below 30V/μs. The receivers accept the input levels both of RS-232C standard minimum requirement level (±3V) and TTL level. Furthermore,the hysteresis circuit and noise filter incorporated on each receiver ensures noise-free operation. FEATURES
- •Based on the RS232C Standard
- •3 Drivers and 3 Receivers
- •Low Operating Current
- •Driver Output Voltage (±25Ｖ)
- •Receiver Input Voltage (±27V)
- •Output Impedance at Power-off (Driver) (300Ω(Min))
- •Slew Rate (Driver) (30V/μs(Max))
- •TTL-compatible Inpout (Driver)
- •TTL-compatible Inpout/Output (Receiver)
- •Hysteresis Input (Receiver)
- •Noise Filter On-chip (Receiver)
- •Package Outline (DIP/DMP16)
- •C-MOS Technology
NJU6402B DATA SHEET