- 15/5 NJW1616
- 600mA, 500kHz, Step-Down Switching Regulator in SOT-23
- 8/5 NJU7366
- Single-phase DC Brushless Motor Driver IC (Io=±250mA, A-PWM)
- 8/5 NJU7367
- Single-phase DC Brushless Motor Driver IC (Io=±350mA)
- 8/5 NJU7367A
- Single-phase DC Brushless Motor Driver IC (Io=±350mA, Start up Assist Function)
- 7/5 NJU7048
- High-Speed, Rail-to-Rail I/O, Quad CMOS Operational Amplifier
- 7/5 NJW4185
- High Voltage Io=500mA Low Dropout Regulator
- 7/5 NJG1683ME7
- High Isolation X-SP3T(DP6T) Switch
- 7/5 NJG1686MHH
- SP10T Antenna Switch GaAs MMIC
- 7/5 NJG1695ME7
- High Isolation X-SP4T(DP8T) Switch
| Products Information > Microprocessor Peripheral ICs > IO Port Extension > NJU3711 |
 |
Part Number NJU3711
FUNCTION 8-BIT SERIAL TO PARALLEL CONVERTER
GENERAL DESCRIPTION
The NJU3711 is an 8-bit serial to parallel converter especially applying to MPU outport expander. The effective outport assignment of MPU is available as the connection between NJU3711 and MPU using only 4 lines. The serial data synchronizing with 5MHz or more clock can be input to the serial data input terminal and the data are output from parallel output buffer through serial in parallel out shift register and parallel data latches. The hysteresis input circuit realizes wide noise margin and the high drive-ability output buffer (25mA) can drive LED directly. FEATURES
- •8-Bit Serial In Parallel Out
- •Hysteresis Input (0.5V typ)
- •Operating Voltage (5V±10%)
- •Maximum Operating Frequency (5MHz and more)
- •Output Current (25mA)
- •C-MOS Technology
- •Package Outline (DIP14/DMP14/SSOP14)
NJU3711 DATA SHEET