- 15/5 NJW1616
- 600mA, 500kHz, Step-Down Switching Regulator in SOT-23
- 8/5 NJU7366
- Single-phase DC Brushless Motor Driver IC (Io=±250mA, A-PWM)
- 8/5 NJU7367
- Single-phase DC Brushless Motor Driver IC (Io=±350mA)
- 8/5 NJU7367A
- Single-phase DC Brushless Motor Driver IC (Io=±350mA, Start up Assist Function)
- 7/5 NJU7048
- High-Speed, Rail-to-Rail I/O, Quad CMOS Operational Amplifier
- 7/5 NJW4185
- High Voltage Io=500mA Low Dropout Regulator
- 7/5 NJG1683ME7
- High Isolation X-SP3T(DP6T) Switch
- 7/5 NJG1686MHH
- SP10T Antenna Switch GaAs MMIC
- 7/5 NJG1695ME7
- High Isolation X-SP4T(DP8T) Switch
| Products Information > GaAs MMICs > Amplifier IC > NJG1126HB6 |
 |
Part Number NJG1126HB6
FUNCTION 2GHz BAND LOW NOISE AMPLIFIER
GENERAL DESCRIPTION
The NJG1126HB6 is a low noise amplifier GaAs MMIC designed for 2GHz band application, and 1.7-3.8GHz operation with modified schematic.This IC has the function which bypasses LNA, and high gain mode or low gain mode can be chosen high IIP3 and a low noise are achieved at the High gain mode.And low current consumption can be achieved at the low gain mode because LNA enters the state of the standby.An ultra-small and ultra-thin package of the USB8-B6 is adopted.APPLICATIONS
W-CDMA and LTE applicationW-LAN and WiMAX application
Note: Please check the Application Note for LTE, WLAN and WiMAX.
FEATURES
- •Operating frequency range (1.7 to 3.8GHz)
- •Low voltage operation (+2.7V typ.)
- •Low CTL voltage operation (+1.85V typ.)
- •Low current consumption (2.2mA typ. @VCTL=1.85V/1µA typ. @VCTL=0V)
- •High gain (16.5dB typ. @VCTL=1.85V, fRF=2140MHz)
- •Low noise figure (1.4dB typ. @VCTL=1.85V, fRF=2140MHz)
- •Pin at 1dB Gain Compression point (
-12.0dBm typ. @VCTL=1.85V, fRF=2140MHz/+11.0dBm typ. @VCTL=0V, fRF=2140MHz) - •High input IP3 (
0dBm typ. @VCTL=1.85V, fRF=2140MHz/+16.0dBm typ. @VCTL=0V, fRF=2140MHz) - •Small package (USB8-B6（Package size: 1.5mm x 1.5mm x 0.55mm typ.）)
NJG1126HB6 DATA SHEET