- 15/5 NJW1616
- 600mA, 500kHz, Step-Down Switching Regulator in SOT-23
- 8/5 NJU7366
- Single-phase DC Brushless Motor Driver IC (Io=±250mA, A-PWM)
- 8/5 NJU7367
- Single-phase DC Brushless Motor Driver IC (Io=±350mA)
- 8/5 NJU7367A
- Single-phase DC Brushless Motor Driver IC (Io=±350mA, Start up Assist Function)
- 7/5 NJU7048
- High-Speed, Rail-to-Rail I/O, Quad CMOS Operational Amplifier
- 7/5 NJW4185
- High Voltage Io=500mA Low Dropout Regulator
- 7/5 NJG1683ME7
- High Isolation X-SP3T(DP6T) Switch
- 7/5 NJG1686MHH
- SP10T Antenna Switch GaAs MMIC
- 7/5 NJG1695ME7
- High Isolation X-SP4T(DP8T) Switch
| Products Information > GaAs MMICs > Amplifier IC > NJG1107HB6 |
 |
Part Number NJG1107HB6
FUNCTION LOW NOISE AMPLIFIER GaAs MMIC
GENERAL DESCRIPTION
The NJG1107HB6 is a Low Noise Amplifier GaAs MMIC designed for GPS This amplifier provides low noise figure,high gain and high IP3 operated by single low positive powersupply.This amplifier includes internal self-bias circuit and inputDC blocking capacitor.This amplifier can be tuned to wide frequency point(1.5GHz～2.4GHz).An ultra small and ultra thin package of USB8-B6 isadopted. FEATURES
- •Low voltage operation (+2.7V typ.)
- •Low current consumption (2.5mA typ.)
- •High small signal gain (17dB typ. @f=1.575GHz)
- •Low noise figure (1.1dB typ. @f=1.575GHz)
- •High Input IP3 (-4.0dBm typ. @f=1.575+1.5751GHz)
- •Ultra small & ultra thin package (USB8-B6 (Package size: 1.5x1.5x0.55mm))
NJG1107HB6 DATA SHEET