- 15/5 NJW1616
- 600mA, 500kHz, Step-Down Switching Regulator in SOT-23
- 8/5 NJU7366
- Single-phase DC Brushless Motor Driver IC (Io=±250mA, A-PWM)
- 8/5 NJU7367
- Single-phase DC Brushless Motor Driver IC (Io=±350mA)
- 8/5 NJU7367A
- Single-phase DC Brushless Motor Driver IC (Io=±350mA, Start up Assist Function)
- 7/5 NJU7048
- High-Speed, Rail-to-Rail I/O, Quad CMOS Operational Amplifier
- 7/5 NJW4185
- High Voltage Io=500mA Low Dropout Regulator
- 7/5 NJG1683ME7
- High Isolation X-SP3T(DP6T) Switch
- 7/5 NJG1686MHH
- SP10T Antenna Switch GaAs MMIC
- 7/5 NJG1695ME7
- High Isolation X-SP4T(DP8T) Switch
| Products Information > Audio > Audio Amplifier > NJU7089 |
 |
Part Number NJU7089
FUNCTION High-Power & Low-Voltage Audio Power Amplifier
GENERAL DESCRIPTION
The NJU7089 is an audio power amplifier designed for telephone applications. No external coupling capacitors are required because of the differential outputs. The closed loop gain is adjusted by two external resistors,and a SD pin permit power down with muting the input signal.The NJU7089 improves high output power compared with other amplifier. FEATURES
- •Operating Voltage (V+=1.8 to 5.5V)
- •Operating Current (IDD1=3.0mA typ. (V+=5V,RL=∞ , no signal)
IDD1=2.5mA typ. (V+=3V,RL=∞ , no signal)) - •Output Power (P0=1.2W typ.(V+=5V,RL=8ohm,THD=1%)
P0=500mW typ.(V+=3.3V,RL=8ohm,THD=1%)) - •Supply Current in Shutdown Mode
- •Thermal Shutdown Circuit
- •Pop Noise Suppression Circuit
- •Over Current Protection Circuit
- •C-MOS Technology
- •Package Outline (VSP8/SSOP20-C3/ESON8-V1)
NJU7089 DATA SHEET